This project included a two-floor addition to an existing five-story patient tower, creating a penthouse for facility equipment, relocating the NICU, replacing the exterior skin of the tower and upgrading patient rooms to meet the latest regulatory standards and market demands while maintaining the hospital as an acute-care facility and the required 240 patient beds. The initial challenge was to create a watertight seal for the existing patient tower. After an extensive value analysis, RAC recommended a 100,000-square-foot exterior glass curtain wall be installed using a unitized system. This saved an estimated eight months in construction. Once the mechanical penthouse was constructed on the eighth floor, existing mechanical was rerouted from each floor and tied into the new system. This freed up space for larger patient rooms and enhanced clinical workstations. Because the rooms and bathrooms were on different footprints from the bottom floors, there was significant utility transitioning on a room-by-room basis. A noise abatement plan was vital in the success of this project.